Building Material Self Levelling Cement Concrete For Vinyl Flooring
5 - 30℃
Building Material Self Leveling Cement Concrete For Vinyl Flooring
This product is produced with excellent formulation using special
cement ,fine aggregate and spray-dried dispersible polymer powder
and special additives. It is high fluidity and plasticity. It is
widely apply to the residence,and business buildings.
Technical Specification(23℃,humidity 50-55%)
|Working Time||About 20min|
|Compressive Strength||(MPa)≥22(after 28days)|
|Split Strength||(MPa)≥4.0(after 28days)|
|Quality Guarantee Period||6months|
|Theoretical application rate||6-7㎡/25KG|
|the mixing ratio||25kg cement : 6.5kg water|
|Packaging Details:||25kg laminated paper bag|
|The time of Laying the flooring||Above 24h|
Features of performance:
1. High fluidity, is capacity to extend service life and decorative
effect of various floor covering
2. Easy to apply, quick setting, various floor-covering materials
can be applied after short time.
3. High compressive and the tensile strength and alkali resistance.
4. Economical and practical and Environmental friendly
The surface should be clean, dry and strong without loose part. The
substrate should be cleaned thoroughly. Before application of the
compound the substrate should be applied by proper primer. When the
primer is absorbed and the substrate is in a half-dry state, Start
self leveling construction .
First, mix the product with water in the mixing ratio of
self-leveling cement: water=25:6.5kg. The mixing method is: pour
clean water into a suitable container, then add self-leveling
cement while stirring vigorously until uniform viscous mixture is
Pour the mixture on the area to be applied, spread the material
uniformly to required thickness using toothed rake (range of
thickness is 1-4mm).The mixture must be finished in 20min.
It is the next step to remove entrance air by particular roller.
Various flooring materials can be applied on it after dry.